Display/Measurement Range - Endress+Hauser RMA 422 Mise En Service

* Total decimal point
Selection of the mathematics
channel decimal point
* Total offset
Signal offset/ measured
value displacement of the
mathematics channel
* X-value for linearisation
point 1
Input value (X) for the first
point in the linearisation table
* X-value for the last
linearisation point
Input value (X) for the last
point in the linearisation table
* Decimal point Y-value
Selection of the decimal point
for the Y table value
* Y-value linearisation
point 1
Output value (Y) for the first
point on the linearisation table
* Y-value last linearisation
point
Output value (Y) for the last
point on the linearisation table
* Table offset
Measured value offset on the
linearisation values

5.3 Display/measurement range

Parameter
* Reference value
Selection of signal source of
the display value
MADP
Selection range:
0 to 4 decimal points
MAOFF
Value:
-19999 to 99999
MSCLO
Value:
-19999 to 99999
MSCHI
Value:
-19999 to 99999
MDIDP
Selection range:
0 to 4 decimal points
MDILO
Value:
-19999 to 99999
MDIHI
Value:
-19999 to 99999
MDIOF
Value:
-19999 to 99999
Setting up selections
DISOW
Selection range:
IN1
: Process value ch. 1
IN2
: Process value ch. 2
MATH
: Process value maths.
Process transmitter
9999,9
0,0
0,0
100,0
9999,9
0,0
100,0
0,0
Default Actual
settings setting
IN 1
53