Publicité
Les langues disponibles
Les langues disponibles
c) Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any ad-
justments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool acciden-
tally.
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools clean and sharp. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the power tool in un-
expected situations.
5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
Safety instructions for reciprocating saws
• When performing work during which the elec-
trical tool can meet with concealed power lines
or its own power cord, hold the electrical tool
by the insulated handle surfaces. Contact with a
live power line can also electrify metal device parts
and lead to an electric shock.
• Fasten and secure the workpiece to a stable
base using clamps or other means. If the work-
piece is held only by hand or against the body, it
remains unstable, which may result in a loss of con-
trol.
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
ADDITIONAL SAFETY WARNINGS
Caution: Risk of injury and damage to property!
• Do not use any blunt or bent blades or blades which
are damaged in any other way.
• Before sawing the work piece, check for hidden for-
eign objects such as nails, screws. These must be
removed.
• Always insert a suitable saw blade.
• Secure the work piece with the aid of clamping de-
vices on the workbench.
• Apply only as much pressure as is required for
sawing. If there is excessive pressure, the sawing
blade may bend and break.
• Switch the device off immediately if the sawing
blade jams. Spread the saw cut out and pull the
blade out carefully.
• Always stand to the side of the saw when working.
• Always make sure that the workplace is well ven-
tilated.
• Avoid over-stressing the device while working.
Careful handling and use of battery devices
• Charge the batteries only in chargers that are
recommended by the manufacturer. Risk of fire
if a charger that is suitable for a specific type of
battery is used with other batteries.
• In the power tools, use only the batteries de-
signed for the purpose. The use of other batter-
ies may result in injuries and risk of fire.
• Keep the unused battery away from paper
clips, coins, keys, nails, screws and other small
metal objects, which could cause bridging of
the contacts. A short circuit between the battery
contacts may cause burns or fire.
• If used incorrectly, liquid may leak from the
battery. Avoid contact with this. In the event of
accidental contact, rinse off with water. If the
liquid gets into eyes, seek medical assistance.
Leaking battery fluid may cause skin irritations
or burns.
• Ensure that the device is switched off before
inserting the battery. Inserting a battery into a
power tool that is switched on may result in acci-
dents.
• Recharge the batteries indoors only because
the battery charger is designed for indoor use
only. Risk of electric shock.
• To reduce the electric shock hazard, unplug the
battery charger from the mains before cleaning
the charger.
• Do not subject the battery to strong sunlight
over long periods and do not leave it on a heat-
er. Heat damages the battery and there is a risk of
explosion.
• Allow a hot battery to cool before charging.
19 | GB
Publicité
