FIOR & GENTZ NEURO TRONIC Mode D'emploi page 29

For producing a KAFO with a NEURO TRONIC system knee joint, you need the corresponding component set
for the orthosis type. You also need to select the appropriate controller (see table). A set includes in the scope
of delivery the following system components (fig. 8):
1
Article Number for
System Width
Item 16mm
1 ET3830*
1 ET3845*
2 ET3840*
3 KG0382-5**
w/o fig. SC1302-L06*** SC1302-L06***
4 SK0935-06
5 SK0935-05
6 KG0384-09**** KG0384-09**** cable connecting aid****
7 ET0420-4
8 SK0935-00
w/o fig. OB1000-XL
* Only one controller is included in each component set. You have received the controller based on your selected component
set.
** Is part of the controller.
*** Are required for mounting the controller retainer and are supplied with the controller.
**** Is part of the controller with integrated lithium-polymer battery.
2 3
20mm Description
controller without Bluetooth with
ET3830*
exchangeable batteries*
controller with Bluetooth with
ET3845*
exchangeable batteries*
controller with Bluetooth with
ET3840*
lithium-polymer battery*
KG0382-5** retainer for controller**
countersunk flat head screw, cross
recessed H***
lamination dummy for cable cover
SK0935-06
guidance
SK0935-05 cable cover conduit made of plastic
ET0420-4 connection cable for solenoid
lamination dummy for solenoid
SK0935-00
connection cable
OB1000-XL cloth bag for orthoses with logo
4
7
5
6
8
fig. 8
Quantity for
Construction
uni- bi-
Unit lateral lateral
pce. 1 1
pce. 1 1
pce. 1 1
pce. 1 1
pce. 4 4
pce. 1 2
pce. 1 2
pce. 1 1
pce. 1 2
pce. 1 2
pce. 1 1
29