Neuro Tronic Knee Joint System - FIOR & GENTZ NEURO TRONIC Mode D'emploi

5. NEURO TRONIC Knee Joint System

The knee joint system is also available with Bluetooth® technology and consists of the following articles
(fig. 7):
system knee joint
1
component set including controller
2
remote control for the patient including microprocessor-controlled quick charger or USB charging
3
cable and User app
multi-purpose device for the technician and Expert app
4
The system knee joint and the controller are mounted to the patient's orthosis. In order to put the orthosis
into operation and adjust it, you need the multi-purpose device or the Expert app (the app has to be unlocked
with a multi-purpose device with Bluetooth once). The patient needs the remote control to use the orthosis.
As a complement, the User app can be used.
In order to operate or adjust the orthosis via an app, the orthosis has to be equipped with a controller
with Bluetooth.
remote control
3
system knee joint
1
2 controller
28
PATIENT
4
3
User app
microprocessor-
3
controlled quick
charger
multi-purpose device
3
USB charging
cable
ORTHOTIST
4
Expert
app
fig. 7