Siemens SITRANS FUS1010 Guide Rapide page 8

Masquer les pouces Voir aussi pour SITRANS FUS1010:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction
1.2 Safety Notes
Explosion hazard
Death or severe personal injury and/or equipment and property damage will result due to
improper installation or use of this equipment when located in a Hazardous (Classified)
Location.
● Install as directed.
● Disconnect power source before servicing.
● Keep cover closed when equipment is operating.
Qualified personnel
This flow meter system may only be set up and used in conjunction with this Quick Start
Guide and the instructions on the electronic media provided. Installation, maintenance and
operation of the flow meter system may only be performed by qualified personnel. Within the
context of this Quick Start guide, qualified persons are defined as persons who have the skills
and knowledge related to the construction and operation of the electrical equipment and
installations and have received safety training to recognize and avoid the potentially explosive
hazards involved.
Qualified personnel posses the following qualifications
1. Is trained and authorized to energize, de-energize, clear, ground and tag circuits and
2. Is trained in the proper care and use of protective equipment such as rubber gloves, hard
3. Is trained in rendering first aid
Note
This Quick Start Guide does not purport to cover all details or variations in equipment, or to
provide for every possible contingency to be me in connection with installation, operation or
maintenance. Should further information be desired or should particular problems arise,
which are not covered sufficiently for the purchaser's purposes, the matter should be referred
to the local Siemens sales office (www.siemens.com). The contents of this Quick Start Guide
shall not become part of or modify any prior or existing agreement, commitment or
relationship. The sales contract contains the entire obligation of Siemens. The warranty
contained in the contact between the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the existing warranty.
Quick Start Guide Safety Information for Hazardous Areas
6
DANGER
WARNING
equipment in accordance with established safety practices.
hat, safety glasses or face shields, flash clothing, etc., in accordance with established
safety practices.
FUS1010 IP65 NEMA 4X Quick Start
Operating Instructions, 12/2008, CQO:QSG002 Revision B

Publicité

Table des Matières
loading

Table des Matières