Scope Of Supply; Application Instructions - Hbm Paceline Cmc Manuel D'emploi

8
1

Scope of supply

Order number
1‐CMC / 5 kN
1‐CMC / 20 kN
1‐CMC / 50 kN
1‐CMC / 70 kN
1‐CMC / 120 kN
To be ordered separately:
1‐KAB168‐5
1‐KAB168‐20
NOTE
The piezoelectric force transducer is only delivered together
with the calibrated measurement chain.
The transducer is only ever available separately as a
replacement.
2

Application instructions

Piezoelectric force measurement chains of the CMC type series are suitable
for measuring compressive forces. Because they provide highly accurate
dynamic and quasi‐static force measurements, they must be handled very
carefully. Particular care must be taken when transporting and installing the
devices. Dropping or knocking the transducers may cause permanent
damage.
The transducers are extremely rigid and have a high natural frequency.
The specifications list the permissible limits for mechanical, thermal and
electrical stress. It is essential that these are taken into account when
planning the measuring set‐up, during installation and ultimately, during
operation.
HBM
CFT/ 5 kN piezoelectric force transducer , 3 m transducer
connection cable CMA / 39 charge amplifier
CFT/ 20 kN piezoelectric force transducer , 3 m transducer
connection cable CMA / 158 charge amplifier
CFT / 50 kN piezoelectric force transducer, 3 m transducer
connection cable CMA / 210 charge amplifier
CFT / 70 kN piezoelectric force transducer, 3 m transducer
connection cable CMA / 287 charge amplifier
CFT / 120 kN piezoelectric force transducer, 3 m transducer
connection cable CMA / 482 charge amplifier
8-core cable to continuing electronics, 8‐wire,
M12x1 cable plug, 5 m long, free ends
8-core cable to continuing electronics, 8‐wire,
M12x1 cable plug, 20 m long, free ends
CMC
A2319-4.0 en/de/fr