HBM PACEline CMC Manuel D'emploi page 21

CMC
Parameter
Calibration Date
Calibration Initials
Calibration Peroid
(Days)
Measurement location
ID
1)
Typical values for the CMC/20kN piezoelectric force measurement chain
For more extensive information about TEDS, look in the TEDS Operating
Manuals on the Internet at www.hbm.com/TEDS
A2319-4.0 en/de/fr
1)
Value Unit
27-Jun-2007
HBM
0 days
0
Change
require
s rights
to level:
CAL Date of the last calibration or
creation of the test certificate (if no
calibration carried out), or of the
storage of the TEDS data (if only
nominal (rated) values from the data
sheet were used). Format:
day-month-year.
Abbreviations for the months: Jan,
Feb, Mar, Apr, May, Jun, Jul, Aug,
Sep, Oct, Nov, Dec.
CAL Initials of the calibrator or calibration
laboratory concerned.
CAL Time before recalibration, calculated
from the date specified under
Calibration Date.
USR Identification number for the
measuring point. Can be assigned
according to the application.
Possible values: a number from 0 to
2047. If that is not enough, the HBM
Channel Comment template can
also be used for this purpose.
21
Explanation
HBM