Table des Matières
Publicité
1
BASIC PROGRAMMING
The programming adjusts the machine to different uses
and situations and thus allows to obtain its maximum
flexibility.
Programming is carried out on the keyboard T.
A number of operations can be carried out that increase
functional performance.
1.1
On
1.2
Programming of flavours
(Setting of flavours on the glass container's LCD
display)
1.3
Programming of clock
(Setting of date and hour)
1.4
Password
1.5
Programming "black box"
(Registration and control of operating temperature)
1.1 On
• Turn the machine on, as described in the chapter "Start/
Use".
• After some seconds, the LCD display is switched on and
the following message appears (V1):
The word "ISA" in the upper left corner is usually blinking
when:
- an interruption of the electric supply has occurred;
- the machine has been disconnected from the electric
supply system.
This means that the time has to be re-programmed.
Key functions
"UP" key to move backward
"DOWN" key to move forward
key to confirm data
key to exit from a programming operation
to write numbers
Keys 0...9
- 2
0
I S A
V1
The word "COMP" indicates
that the compressor is running
The word "VEN" indicates that the ventilation
fans are running; check the temperature.
The sign (*) indicates that the de-frost cycle is running.
14
T
°
C
C O
M P
°
- 3
C
*
V
E N
Publicité
Table des Matières
