Installation To The Wall - GENDEX Oralix AC Manuel De Service

INSTALLATION

2.2. INSTALLATION TO THE WALL

Place the Wall Support and the Timer at the desired location on the wall and mark the holes in the wall,
1
using the Wall Plate as a template
Drill the four pilot holes:
2
- for the Wall Support (with a 9 mm drill bit)
- for the Timer (with a 8 mm drill bit).
Position the Timer over the four pilot holes, hav-
3
ing routed the line cable through the Timer knock
out and having routed additional cable from the
Timer to the Wall Support.
B-6
additional cable
Timer-Wall Support
line cable
(mains)
Printed on: 22 Mär 2012, 09:28:10 am; Printed by: TOBIAS BAUER
... and the template on page BZ-2 for the Timer.
ORALIX AC SYSTEM
WARNING
Do not use the Timer as
a template ! Electronic
components could be
irreparably damaged !
Gendex Dental Systems