GENDEX Oralix AC Manuel De Service page 26

INSTALLATION
4
Tie the guide cord of the Extension Arm to the Folding Arm cable.
Feed the Folding Arm cable through the Exten-
5
sion Arm and through the Wall Support, with the
help of the guide cord.
Lightly grease the support pin
6
By moving vertically, carefully insert the support
7
pin of the Folding Arm into the Extension Arm;
secure finally the screws (c) of the Extension Arm.
Connect the wires of the Folding Arm cable to the
Wall Support terminal strip, as described in BZ-
4, System electrical connections.
B-12
Printed on: 22 Mär 2012, 09:28:10 am; Printed by: TOBIAS BAUER
ORALIX AC SYSTEM
(c)
Gendex Dental Systems