Maintenance Of The Extension Arm; Maintenance Of The Mobile Stand - GENDEX Oralix AC Manuel De Service

PREVENTIVE MAINTENANCE

4.2.2. Maintenance of the Extension Arm

For the maintenance of the Extension Arm follow the
procedure below:
1
Unscrew the two friction screws (h).
Extract slightly the arm base to access the ball
2
bearing (i): inspect for wear and lubricate it.
3
Screw back the friction screws (h).
4
Remove the snap-out caps (l) and inspect for wear the bush (m): replace it if required and remount the
caps (l).
5
Lift slightly the Extension Arm at the side of the Wall Support and grease the spigot (n).
6
Inspect for wear ring (o) and replace it if required.
7
Inspect for wear the cabling and check the protective earth connection.

4.2.3. Maintenance of the Mobile Stand

For the maintenance of the Mobile Stand follow the
procedure below:
1 Check for wear the wheels (a) and verify the
correct rotation: replace them if necessary.
Inspect the wheel brakes (b) and verify the effi-
2
ciency of their action: replace the complete
wheels with brakes if required.
3
Inspect for wear the mains cable and its attach-
ment to the column.
Gendex Dental Systems
Printed on: 22 Mär 2012, 09:28:10 am; Printed by: TOBIAS BAUER
(l)
(n)
(o)
mains power cable
(a) (b)
ORALIX AC SYSTEM
(i)
(h)
(m)
(h)
(l)
(b) (a)
E-5