Cleaning And Maintenance - Zephyr ARC Serie Instructions D'installation Et D'utilisation

CLEANING AND MAINTENANCE

Proper maintenance of the Range Hood will assure proper performance of the unit.
Motor
The motor is permanently lubricated and never needs oiling. If the motor bearings make
excessive or unusual noise, replace the motor with the exact service motor. The impeller
should also be replaced.
Mesh Filters
The mesh fi lters should be cleaned frequently. Using warm water with detergent. Mesh
fi lters are dishwasher safe.
Clean all-mesh fi lters in the dishwasher using a non-phosphate detergent. Discoloration of
the fi lter may occur if using phosphate detergents, or as a result of local water conditions -
but this will not affect fi lter performance. This discoloration is not covered by the warranty.
See "MESH FILTERS" section for removal and installation instructions.
Non-ducted Charcoal Filter
The non-ducted charcoal fi lter should be changed every 6 months or when prompted on
the hood controls. Replace more often if your cooking style generates extra grease, such
as frying and wok cooking. See "MESH FILTERS" section for removal and installation
instructions.
LED Lighting
In the unlikely event that your LED strip fails, please contact Zephyr to order replacement
parts and schedule service.
Stainless Steel Cleaning
DO:
• Regularly wash with clean cloth or rag
soaked with warm water and mild soap or
liquid dish detergent.
• Always clean in the direction of original
polish lines.
• Always rinse well with clear water (2 or 3
times) after cleaning. Wipe dry completely.
• You may also use a specialized household
stainless steel cleaner.
Avoid: When choosing a detergent
• Any cleaners that contain bleach will attack stainless steel
• Any products containing: chloride, fl uoride, iodide, bromide will deteriorate surfaces
rapidly.
• Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc.,
are highly explosive and should never be used close to a range.
DON'T:
• Use any steel or stainless steel wool or
any other scrapers to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction
residues reach the hood. During construc-
tion/renovation, cover the range hood to
make sure no dust sticks to the stainless
steel surface.
- 12 -