Zephyr ARC Serie Instructions D'installation Et D'utilisation page 23

CONNECT THE WIRES (1 INTERNAL MOTOR)
Note: This range hood must be properly grounded. The unit should be installed by
a qualifi ed electrician in accordance with all applicable national and local electrical
codes.
1. Make connections (A, B,C, D) (Fig.24).
2. Secure capacitor box screwing the (2) 3.9x9.5 mm screws (Fig.24D).
A
CONNECT THE WIRES
(2 INTERNAL MOTORS)
Note: This range hood must be
properly grounded. The unit
should be installed by a qualifi ed
electrician in accordance with
all applicable national and local
electrical codes.
1. Make connections (A) (Fig.25).
D
B
- 23 -
(2) MOUNTING SCREWS
(3.9 x 9,5 mm)
GROUND
A
C
FIG.24
FIG.25