Zephyr ARC Serie Instructions D'installation Et D'utilisation page 24

INSTALLATION EXTERNAL
AND IN-LINE BLOWER
NOTE: The following instructions are for
preparing the hood for use with external
or in-line blower models CBE-1000 or PBN-
1000A. For blower installation details refer
to manual included with the blower.
If you choose "A" air outlet (Fig.26):
1. Remove the knockout (Fig.27).
2. Install 10" round collar to the hood by means
(2) mounting screws 3.9x6mm (Fig. 28).
AIR OUTLET "A"
(2) MOUNTING SCREWS
(3.9 x 6 mm Flat Head)
- 24 -
AIR OUTLET "B"
FIG.26
FIG.27
10" ROUND
COLLAR
FIG.28