Maintenance; Hood & Filter Cleaning - Zephyr Spruce AK9834BS Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM
Hood & Filter Cleaning
Surface Maintenance
►
Do not use corrosive detergents, abrasive detergents or oven cleaners.
►
Do not use any product containing chlorine bleach or any product containing chloride.
►
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Clean periodically with warm soapy water and clean cotton cloth or micro fiber cloth. Always rub
in the direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser
detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless
luster and grain. Always scrub lightly, with clean cotton cloth or micro fiber cloth and buff in the
direction of the stainless steel grain.
Cleaning the Pro Baffle Filters
The stainless steel pro baffle filters are intended to trap residue and grease from cooking. Although
the filters should never need replacing, they are required to be cleaned every 30 days or more often
depending on cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry filters and re-install
before using hood.
If this hood is installed in a salt water area (e.g. coast), rinse all
Spruce Use, Care, and Installation Guide
CAUTION
surfaces once a week with clear water even if the hood is not
used. Wipe and dry completely after rinsing.

Maintenance

17