Preparation & Installation - Zephyr Spruce AK9834BS Guide D'utilisation, D'entretien Et D'installation

Installation Instructions
Preparation & Installation
1
14
1
2
1
2
1. Remove baffle filters by: 1) Pulling
filter toward front of insert. 2)
Pivoting rear of filter down.
2. Remove grease tray by: 1) Pulling
up on tray to release from bottom
panel. 2) Lifting tray out of insert
body.
3. Remove left and right side-
spacer panels by removing (2)
screws from behind each panel, if
applicable.
Spruce Use, Care, and Installation Guide
P R O
S P R U C E
I N S E R T