NSK Various Combi Pro Mode D'emploi page 8

4-1 Operation Panel
(1) Ultrasonic Mode Select Key
(1) Ultrasonic Mode Select Key
Switches the Ultrasonic Mode between P (Perio), E (Endo),
G (General). The strongest power level is G, followed by E and P.
Power Level, Irrigation Level, and Irrigation Mode can be set for
each mode.
(2) Power Level Key
Sets the power level using the
(3) Irrigation Volume Key
Sets the irrigation volume using the
(4) Operation Mode Select Key
Switches between "Ultrasonic Mode" and "Powder Mode."
4-2 LCD Panel
(1) Power Level Indicator
(1) Power Level Indicator
Displays the current power on the Bar Graph Indicator.
(2) Operation Mode Display
Displays the current Operation Mode (Ultrasonic or Powder).
(3) Powder Mode Display
Displays the set chamber (Prophy or Perio) (only when Powder
Mode is in use).
(4) Irrigation Volume Indicator
Displays the selected Irrigation Level on the Bar Graph Indicator.
(2) Power Level Key
/ keys.
/ keys.
(2) Operation
Mode Display
(8) Ultrasonic Mode Display
(7) Power Level Display
(3) Irrigation Volume Key
(5) Auto-Cleaning Key
Starts Auto-Cleaning. Refer to "9-1-1 Auto-Cleaning" (Ultrasonic
Handpiece) or "9-2-1 Auto-Cleaning" (Powder Handpiece) for
details.
Ultrasonic Mode:
Sprays tap water for 15 seconds, then sprays water from the
Irrigation Bottle for 30 seconds to clean the Ultrasonic Handpiece.
Powder Mode:
Sprays air and water at the same time for 10 seconds and then
sprays only air for 35 seconds.
(6) Irrigation Mode Select Key
Switches the Irrigation Mode (Bottle or tap water) for Ultrasonic
Mode. Tap water is always used for Powder Mode.
(3) Powder Mode Display
(4) Irrigation Volume Indicator
(5) Error Display
(6) Irrigation Mode Display
(5) Error Display
Displayed when an error occurs. Refer to "13 Error Code" for
details.
(6) Irrigation Mode Display
Displays the Irrigation Mode (Bottle or tap water) for Ultrasonic
Mode. Tap water is always used for Powder Mode.
(7) Power Level Display
Displays the current Power Level as a number.
(8) Ultrasonic Mode Display
Displays the current Ultrasonic Mode (P/E/G).
7
(4) Operation Mode Select Key
(5) Auto-Cleaning Key
(6) Irrigation Mode Select Key