Aux Operation; Netremote - auna Connect System S Mode D'emploi

EN
64

AUX OPERATION

There is an "AUDIO IN" socket located at the rear of the unit. Analogue
audio sound signals from other sources can be input to the unit through this
socket.
1. Connect the input to another audio device via an AUX cable (not
included) with an "AUDIO IN" socket.
2. Press the MODE button repeatedly to select AUX mode.
3. Turn the VOLUME dial on the unit or press the VOL +/– buttons on the
remote control to adjust the volume control for your desired sound
output level.
4. In AUX mode, operate your audio device directly for playback features.
When connecting the external audio device, refer to the owner's manual of
the external device.

NETREMOTE

The device gives a feature of NetRemote by smartphone or tablet in iOS or
Android system. By downloading the
assigned app named UNDOK, you can view all the modes of Internet radio,
Music player, DAB, FM, BT and AUX in.
Search UNDOK from Google Play or Apple Store for UNDOK app, and
install it to your smartphone or tablet. Before using the UNDOK app, make
sure the device and the smartphone or tablet are in the same WiFi network.
Launch the app.
The app initializes and scans for the device in the network. Tap the device to
make the NetRemote connection.
• Once the smartphone or tablet has already accessed the device, they
will automatically connect the next time when you open the app again.
• Be aware that if another smartphone or tablet with the app in the same
network has access with the device; the original connection will be cut
off.
When it is the first time that you connect the device to the unit, the app may
ask you to enter the PIN. Default PIN is 1234. For details of changing the PIN
for security, please refer to System Settings section: Network - NetRemote
PIN Setup. Select your desired mode in the main page. You may then
control the selected mode on your smartphone or tablet and on the device
simultaneously.