Bt Operation - auna Connect System S Mode D'emploi

BT OPERATION

The unit has a BT function that can receive a signal within 8 metres.
Pairing the unit with a BT device to listen to music:
1. Press the MODE button repeatedly to select BT mode.
2. If the unit is not paired with any BT device, the right hand corner will
show a flash the BT symbol.
3. Activate your BT device and select the search mode.
4. "Connect System S" will appear on your BT device list.
5. Select "Connect System S" and enter "0000" for the password if
necessary.
6. To disconnect the BT function, switch to another function on the unit or
disable the function from your BT device.
Playing Music via BT
You may need to adjust the volume on your radio and BT device.
• Press the SCAN/


play/pause music or
• Press / buttons on unit or remote control to skip to the previous/
 
next track
• If the signal strength is weak, your BT receiver may disconnect, but it
will re-enter pairing mode automatically.
• For better signal reception, remove any obstacles between the unit and
the BT device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video remote Control Profile) functions. This can only be
paired with one BT device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the BT function may connect and disconnect
as you make and end calls. This is not an indication of a problem with
your unit.
button on unit or button on remote control to


EN
63