Connections - auna Connect System S Mode D'emploi

EN
46

CONNECTIONS

Connecting to the Mains Supply
Unwind the mains adapter cable to its full length. Connect the mains
adapter to the mains socket. The unit is now connected and ready to use.
Connecting the unit to any other power source may cause damage to the
unit.
Network Connection
This product only supports wireless network connection for network access
and did not support wired LAN connection
Wireless network
1. Check first of all whether the control lamps (LINK/ACT) of your LAN
connection or your router light up.
2. Proceed with the operations described in the below "Getting Started". It
is recommended to run through the setup wizard in the System Settings
section.
This unit cannot be connected to a standalone modem directly. A router or a
modem incorporated with a router has to be used.
Since there are various connection configurations, follow the specifications
and instructions of your telecommunication carrier, internet service
provider, and router setting guidebook.