Aux In Operation - auna Roadie Sing Mode D'emploi

USB SLOT OPERATION
Do not have a compact disc in CD compartment.
1. Slide the "FUNCTION" switch to CD/USB position.
2. Insert a USB drive to the USB port
3. The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT and
PROGRAM is the same as CD/MP3.
4. Press  button long time changing USB mode.

Have compact disc in CD compartment.
1. Slide the "FUNCTION" switch to CD/USB position.
2. Insert a USB drive to the USB port
3. Press "PLAY/PAUSE" button long time to change CD to USB mode
4. The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT and
PROGRAM is the same as CD/MP3.

AUX IN OPERATION

This CD features an AUX-IN jack for connecting your iPod, MP3 player or
other digital music player.
1. Connect the headphone jack of your external device to the AUX IN
jack located on the back of this CD player (The connection cable is not
included).
2. Turn on the CD player and slide the FUNCTION switch to AUX/BT
position, unit will enter the AUX function mode once an external device
is plugged into the AUX IN jack.
3. Start to play your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on your CD player and the external
device.
5. Turn off your iPod, MP3 player and etc. when finish listening. Turn the CD
player off and unplug the AUX IN jack.
NOTE: Once the AUX IN jack is plugged, the BT/AUX player will
automatically enter the AUX mode when the FUNCTION switch is in BT/AUX
mode. Remember to disconnect the cable from the unit after use in order to
be able to listen to the BT mode again.
EN
31