Bt Function; Aux In; Dab Radio - auna Julie Ann Mode D'emploi

BT FUNCTION

1. Select BT mode by pressing BT button.
2. Search from your mobile device "Julie Ann" and connect to play.
3. Now you can transfer the music to the unit and all operations can only
be operated from your device
NOTE: The connected mobile phone BT, if the mobile phone does not cancel
the pairing of this BT, when the mobile phone turns on the BT again, it will
connect automatically , no need to pair.

AUX IN

Press the POWER/FUNCTION button on the unit to AUX IN Mode , then
insert the 3.5mm audio cable of external media players to the AUX IN jack
on the unit. and use your external player to operate the playback.

DAB RADIO

• Turn the system on and set the volume to a low level. Press the
FUNCTION button to enter DAB mode.
• Connect the DAB antenna onto the antenna socket at the back of the
unit, the player will scan the DAB station automatically till receive the
DAB stations are received.
• Rotate the TUNER/SELECT control to choose the DAB stations
manually. Choose the desired DAB station and press the TUNER/
SELECT control to confirm to play. If you tune to a DAB stereo station,
the "stereo" will show on the screen.
• In DAB mode, press INFO to see further information on the playing DAB
station on the screen, i.e Program Type / Program No. / Frenquency
Range / Signal Strength / Time / Date etc.
Station Presets (FM & DAB)
• In DAB/FM playing mode, choose the desired radio station. Press and
hold the PRESET button for 2 seconds, "Preset Store 1: (Empty)" will
show on the screen, press the TUNER/SELECT control to confirm and
"Preset 1 Stored" will show on the screen.
• Rotate the TUNER/SELECT control or press the SKIP+/- button on the
remote contrl to choose the desired radio station programmed.
• Repeat the above 1 - 2 steps to program 10 desired DAB stations or 10 FM
EN
39