Other Features; Active/De-Active Timer Function - auna DS-2 Mode D'emploi

EN
42

OTHER FEATURES

1. Press SLEEP button and sleep indicator "
display (21).
2. Keep pressing the button to adjust the sleep timer in the order of 90 >
75 > 60....15 minutes.
3. System will stop and go to standby mode automatically after the
selected timing.
4. To cancel the sleep mode, press SLEEP button until it reaches "off"
mode.
Remark: If you press the sleep button once and the sleep indicator
" " appears on the LCD display (21), the system will go to standby mode
automatically after selected minutes.
Alarm clock setting (by remote control)
This function allows the system to turn on automatically and wake you up
by CD, tuner, or USB/SD mode respectively. First, set the unit at standby
mode and then press and hold the TIMER button to enter the setting mode,
the LCD display will show set time – select source:
Wake up source:
Press the FUNCTION button to select the source form "TUNER FM" –
"TUNER MW" – "USB" - "SD" – "CD" repeatly. Press TIMER button again
after you have selected the source.
Wake up time:
Press the SKIP UP
minutes and press TIMER button to store the memory.
Remark: The unit will switch off automatically after setting the alarm. The
wake up volume is preset at level 20. If there is no music source being
detected (such as USB/SD/CD) when the preset time is reached, system
will default to tuner mode automatically. For tuner wake up, the system
will preset at the latest radio frequency being listened before switching off.
Please switch off the system manually during alarm wake up mode as the
system will not turn off automatically after alarm on mode.

Active/de-active timer function

• To active the alarm, press the TIMER button onceon remote handset
until the timer indicator "
• To cancel alarm function, press the TIMER button once again until the
timer indicator "
or SKIP DOWN button to set the hour and
" is shown on LCD display (21).
" disappears.
" will be shown on the LCD