auna DS-2 Mode D'emploi page 39

Aux-in encoding
Connect another audio device, e. g. (portable) CD player, MP3 player,
(portable) cassette player, iPod, etc. to this system via a cord with 3.5 mm
dia. jack plugs (not supplied). Connect one end of this cord to the 3.5 mm
dia. headphone jack on the external device and the other end to the 3.5 mm
aux-in jack (11) on the side of the unit. When connected in this way it is
possible to:
• play back the music already on the connected device.
• encode and convert the music files from the connected device to USB
into MP3 format.
Follow the same procedure as described in this manual.
Track separation (by remote handset)
You can divide the recording music from phono or radio to USB track by
track during encoding. Every time when press the "
button once at remote handset during encoding from phono or radio to
USB, the system will generate a new track and continuous the recording.
The text "PHONO" or "TUNER" at LCD display (21) will flash one time, it
means the unit is creating a new track successfully.
Encoding bit rate (by remote handset)
You can select the desired bit rate during encoding from CD/phono/radio
and aux-in to USB, the selectable range from 32 / 64 / 96 / 128 / 192 / 256
kbps.
1. Set in "PHON/AUX" function (19) and remain stop mode.
2. Press the INFO button and the LCD display will show the default bit rate
(128 kbps).
3. Press SKIP UP
bit rate for encoding.
4. Press again the INFO button to confirm the setting and the LCD display
(21) resumes to "PHON/AUX" mode.
or SKIP DOWN buttons (2) to select the desired
" (Track Separation)
EN
39