Radio Functions - auna DS-2 Mode D'emploi

RADIO FUNCTIONS

Auto tuning
1. Press function button (19) to select tuner mode.
2. Press and hold the SCAN button. The FM radio search starts and stores
all received stations automatically (max. 30 FM stations).
3. Tune to the desired station by pressing the SKIP DOWN
button.
4. Adjust volume up/down controls (20) to the desired volume level.
Preset stations
You can store up to total of 40 radio stations in the memory.
1. Set to "TUNER" mode.
2. Turn to the desired radio station by "MANUAL" or "AUTO" tuning
method.
3. Press MEM/CLK-ADJ button (17) to enable program state.
4. Press FOLDER/PRESET UP
(at remote handset) to select the desired station memory position for
storage.
5. Press MEM/CLK-ADJ button (17) again to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
7. Press FOLDER/PRESET UP
select the preset stations in order.
8. To return normal tuner mode, leave keys free.
The pre-set memories will be cancelled completely if switching off the main
power button on system. You are recommended to switch the system into
standby mode for convenience usage. You can overwrite a present station
by storing another frequency in its place.
FM and FM-stereo reception (by remote handset)
Press the FM-ST/MONO button at remote handset repeatedly, the FM
programs are receiving in mono and stereo mode repeatedly. In particular
when stereo signals are weak. It is preferable to receive the program in
mono.
If a stereo signal is being received, the "ST" indicator
LCD display (21) to show FM stereo program is now receiving.
Hints for best reception
The receiver has a build-in FM wire antenna (26) hanging at the rear cabinet.
This wire should be totally unraveled and extended for the best reception.
(16) or FOLDER/PRESET DOWN
or DOWN button at remote handset to
or SKIP UP
button
will appear on
EN
33