Playing Records - auna Julie Ann Mode D'emploi

EN
38

PLAYING RECORDS

This system includes a full-size, 3-speed, belt-drive turntable. You can play
33, 45 and 78 rpm records.
1. Press the POWER button at the front panel and set the volume to a low
level.
2. To enter the PHONO mode. First, Press "FUNCTION" to switch to " AUX"
mode. You may find that both "AUX & PHONO" appearing in the upper
part of the LCD. Then, you can start to play the phono. You will also find
the big characters in the LCD changed to "PHON", which indicates you
are now in "PHONO" mode.
3. Make sure that you have removed the stylus cover from the stylus and
have released the tone arm lock that secured the tone arm to the tone
arm rest.
4. Set the turntable speed selector to the appropriate speed 33,45 or 78
rpm. If you are playing 45 rpm 'singles', place the 45 rpm adapter on the
centre spindle.
5. Place your record on the centre spindle.
6. Raise the cue lever to lift the tone arm off its rest. Move the tone arm to
the edge of the record. The turntable starts automatically. Use the cue
lever to gently lower the tone arm onto the record.
7. Adjust the VOLUME control to the desired level.
8. When the tone arm reaches the end of the record it automatically returns
to the tone arm rest and the record player stops.
9. To turn the system 'off', press the POWER button again and the POWER
indicator goes 'off'.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the
turntable without securing the tone arm clamp could result in damage to
the tone arm.
IMPORTANT
To protect the turntable from damage during transportation, a silver transit
screw is located at the upper right of the turntable platform. Before playing,
place use a screwdriver to turn the transit screw in clockwise direction
(screw going down) completely to unlock the turntable.
To clock the turntable again for transportation,please turn the screw in
counter-clockwise direction.