Aux In Operation; Usb Operation - auna Belle Epoque 1912 Mode D'emploi

EN
32

AUX IN OPERATION

Connect the audio system into the AUX IN jack on the rear panel, Press the
PHONO/AUX IN button. Start playing from the connected device.

USB OPERATION

1. Press the CD/USB button first and the FUNCTION button to enter USB
mode. The '---' and USB icon will be shown.
2. Insert a USB flash device into the USB socket.
3. PLAY/PAUSE, DN/UP and stop functions are the same as CD functions.
Note: You may press the FUNCTION on the panel or long press PLAY/PAUSE
button on the remote control for 2 seconds to change the playing mode
between CD and USB.
Playing in MP3 Mode (CD/USB)
1. Press PLAY/PAUSE button to start or pause playback selected track.
2. While playing the song, the song number and folder number of the
selected track will be shown in the display.
3. You can stop the playback at any time by pressing the STOP button.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD/USB MODE
During CD/USB playback press UP/F.F ( ) or DN/F.R (
the unit front panel or on the remote control repeatedly to change track. To
rapidly search forward or backwards within a track press and hold UP/F.F
(press UP/F.F ( ) or DN/F.R (
forth then press TRACK-10 or TRACK+10 on the remote control.
) button on
) button. To skip 10 tracks back or