Operation - auna Clubmaster 8000 Mode D'emploi

OPERATION

1. Be sure to switch off the power and to connect to corresponding input
jacks.
2. Turn on the power and wait 3-4 seconds until the speaker functions are
connected.
3. Select an audio source by pressing the INPUT A key on the front panel to
display AUX A, BT-A, USB A. Press the INPUT B key on the front panel to
display LINE, USB B, BT-B.
4. Adjust the VOLUME/MULTI knob on the front panel or the VOL+/-
key on the remote control to adjust the setting of the main volume,
treble, bass. Then turn the left push shot to adjust the volume of INPUT
A, turn the right push shot to change the volume of the INPUT B.
5. Press the MENU key on the front panel to display BASS, TREBLE, AUTO,
MAIN then adjust the VOLUME knob to change music treble, bass, light
mode and sound effect.
6. PHONES OUTPUT selection. Press the PHONES MODE button on the
front panel to display INPUT A, INPUT B, or INPUT AB. PHONES VOLUME
adjustment. Press the PHONES MODEL button on the front panel to
display INPUT A or INPUT B or INPUT AB, then rotate the VOLUME/
MULTI knob to adjust the PHONES VOLUME of INPUT A or INPUT B or
INPUT AB.
7. Press the LIGHT button on the remote control or press the MENU button
on the front panel to display light mode, then press the VOLUME/MULTI
knob to change the OFF, R, G, B, RG, RB, GB, RGB, AUTO, DEMO light
mode.
8. Press the MUTE key to mute, press it again to reset.
EN
31