Fm Radio Operation - auna Glastonbury Mode D'emploi

EN
42
Programme Type
This describes the "style" or "genre" of the programme that is being
broadcast.
Frequency
This shows the frequency of the current station.
Audio Bit Rate
The display will show the digital audio bit rate being received.
Stereo/Mono
The display will show if the station being received is in mono or stereo.

FM RADIO OPERATION

NOTE: Before listening to the radio, please check that the telescopic
antenna on the rear of the unit is correctly adjusted for length and direction.
Tuning in to a Station
1. Rotate the SOURCE knob on the unit or repeatedly press the FM/DAB
button on the remote control to select TUNER source. "TUNER" is
displayed on the display.
2. Select a station using one of the following methods.
Auto Tuning
Long pressing the TUN +/- buttons on the unit or / buttons on the
remote control for more than 2 seconds, the frequency changes down or up
automatically until a station is found.
Manual Tuning
Repeatedly press the TUN +/- buttons on the unit or / buttons on the
remote control to change the frequency until you find the station you want.
Preset Tuning (Available only after the stations are preset)
Repeatedly press the PRE +/- buttons on the unit or PRESET/
on the remote control to select the desired preset number. Its band and
frequency are displayed on the display.
Program radio stations
You can program a maximum of 20 preset radio stations (FM).
buttons