Listening To An External Device - auna Glastonbury Mode D'emploi

EN
48
To deactivate sleep timer
Press the SLEEP button repeatedly until [SLEEP 00] is displayed.
When sleep timer is deactivated, the "Zz" is disappears.
Set the alarm timer
Caution: Make sure that you have set the clock correctly.
1. In standby mode, long pressing the TIMER button on the remote control
for more than 2 seconds, the  is displayed and the source (e.g. DISC)
will blink on the display.
2. Press the ⁄ buttons on the unit or
to select a source (e.g. DISC, TUNER etc.).
3. Press the TIMER button to store the setting, the hour digits blink.
4. Repeat steps 2-3 to set the hour, minute and adjust volume.
Note:
• To exit alarm setting mode without storing, press the  button.
• If DISC/USB source is selected and the audio cannot be played, TUNER
is activated automatically.
• If no button is pressed in 10 seconds, the unit exits timer setting mode
automatically.
To deactivate or re-activate an alarm timer
Repeatedly press the TIMER button to activate or deactivate timer, if timer
is activated, the clock symbol is displayed.

LISTENING TO AN EXTERNAL DEVICE

1. Connect the AUX Input terminals on the unit to the AUX output terminals
on the auxiliary equipment with an audio cable illustrated below.
2. Rotate the SOURCE knob on the unit or repeatedly press the BT/AUX
button on the remote control to select auxiliary equipment source. "AUX"
is displayed on the display.
3. Start to play the external device (see the user manual of the external
device).
/⁄on the remote control