Listen To The Radio - auna Arizona Manuel

EN
26
6. When you have entered all track numbers that you want, press the
PLAY/PAUSE button to begin playing the programmed sequence of
tracks.
7. To erase your programmed tracks, press "STOP" button in program
mode, open the CD Door, or change to another function mode, and the
normal playback will resume.
8. In the CD play normally
Press the „PROG" 1 next,The word REP will be displayed on the LCD
display screen on the juke box,Repeat After hearing this song;Press
the repeat button again will play the whole contents the disc, Press
"PROG" one more time to select Random;The Led display will show
"RDM" on the top(press to playback in no particular orde).

LISTEN TO THE RADIO

Note: The built-in station memory can store up to 20 stations. However,
the frequency of the station is not displayed, only the memory location
of the station.
1. Press the POWER button to select FM mode. If you want to turn off the
unit later, press and hold the POWER button for 3 seconds.
2. The display shows [P00] and a signal sounds. When a stereo signal is
received, the display shows [ST].
3. Press STOP/BAND to select FM or AM. The display shows the selected
mode and [P00].
4. Press PLAY/PAUSE to start automatic station search. The display shows
[SCAN].
5. Press PROG repeatedly during station scanning to select the found
stations in the following order.
Note: Clicking PLAY MODE will display [P01] up to [P20]. Within 3
seconds, click TUNER- to go to the previous station or TUNER+ to go to
the next station.