Getting Started And Operation - auna Harper Mode D'emploi

GETTING STARTED AND OPERATION

Note: If you notice that your device regularly switches itself off, this is
not a malfunction but an energy saving function. The device connected
to the mains automatically switches to standby mode if no media has
been played for more than 15 minutes.
Radio
1. Press and hold the ON/OFF/Play button (7) to turn on the unit and slide
function selector (18) to select "Tuner/BT" position and keep the BT/FM
selector (22) in "FM" position.
2. Turn the tuning knob (13) to set the station frequency as desired.
3. Adjust volume know (17) to the desired volume level.
NOTE: The receiver has a rod antenna (12) hanging at the rear cabinet. This
antenna should be totally extended for best reception.
CD Playback
1. Slide function selector (18) to select "CD/AUX" mode.
2. Open the CD door (6).
3. Place a CD with the printed side facing up inside the tray and then close
the CD door.
4. Focus search is performing, the LED display (1) will show the total
number of tracks and total playing time.
Play/Pause mode
1. Press the play/pause button (7) to start playback. The first track will
start playback.
2. To interrupt, press the play/pause button (7) once, and the playing time
will be frozen on the LCD display (1). Press again to resume normal
playback.
Stop Mode
If the stop button (2) is pressed during play or pause mode, system will go
to stop mode.
EN
23