auna Harper Mode D'emploi page 25

5. Repeat steps 3 and 4 to enter additional tracks into the memory if
necessary.
6. When all the desired tracks have been programmed, press the play/
pause button (7) to play the song in assigned order.
7. Press the stop button
Display and Delete CD Playlist
• After programming is completed, press program button (9) to review
the tracks being programmed.
• Press the stop button (2) at CD stop mode to cancel all programmed
memory until the "PROG" indicator disappears on LCD display (1).
MP3 Playback via USB
The system is able to decode and playback all MP3 file which stored in the
memory media via USB host.
NOTE: LED does not display anything during USB playback due to products
design.
1. Set the system at standby mode first or other function except USB
mode.
2. Plug-in the USB pen-drive with the face up and make sure it is going
into completely.
Note: Connecting the USB upside down or backwards could damage the
audio system or the storage media (USB thumb driver). Check to be sure
the direction is correct before connection.
3. Slide the functions selector (18) to USB mode. The USB/BT indicator (10)
will light up.
4. The system will start reading and playback the storage media
automatically after connecting, the USB/BT indicator will change to
flash mode during playback.
5. Press skip up button
Press play/pause button
NOTES:
The system can detect and read the file under MP3 format only at USB

mode but not other music file format.
If you connect the system to MP3 player via the USB socket, due to

variances in MP3 encoding format, some MP3 players may not be able
to play via the USB socket. This is not a malfunction of the system.
USB port does not support connection with USB extension cable and it

is not designed for communication with computer directly.
(2) to terminate program play.
(8) or skip down button
(7) to change to stop mode.
(3) to skip the track.
EN
25