Connection And Setup - auna Areal 652 Mode D'emploi

CONNECTION AND SETUP

Speaker
• Connect the front speakers to the front speakers output terminals.
• Connect the centre speaker's cords to the centre speaker output ter-
minals.
• Connect the surround speakers' cords to the surround speaker output
terminals.
• NOTE: Do not leave any objects generating magnetism near the speak-
ers.
Connecting equipment
• Jacks and plugs of the connecting cords are colour coded as follows:
Red jacks and plugs: Left channel; White jacks and plugs: right channel.
• NOTE: Insert the plugs fully into the jacks. Loose connections may cause
a humming sound or other noise interference.
• Important: first connect the speakers and all other external equipment.
Then, at last, connect the AC power cord.
Setup:
• Place the subwoofer anywhere on the floor.
• Place the front speakers at both sides of the centre, which you place in
the middle.
• Place the surround speakers in the same level slightly behind the listen-
ing area. Align horizontally about 1 m above ear height.
EN
17