Riester ri-vital Mode D'emploi page 62

G) Aligned as shown in the picture on the right with the tip of the slot ahead, the insert
is now pushed into the housing until the press-button has noticeably locked into
place.
H) The predictive thermometer is ready for use again.
8.3 Oral and axillary measurement:
A) For measurements of the ORAL temperature, insert the probe tip into the pocket
under the tongue on either side of the tongue frenulum (the vertical tissue fold in
the middle of the tongue) and push it towards the back.
B) Remove the thermometer probe and attach a probe cover. The thermometer
switches on automatically.
C) The symbol indicating the ORAL and AXILLARY mode appears on the display. The
symbol for the RECTAL mode cannot be displayed if a BLUE thermometer probe is
connected.
8.4 Oral measurement:
A) For measurements of the ORAL temperature, insert the probe tip into the pocket
under the tongue on either side of the tongue frenulum (the vertical tissue fold in
the middle of the tongue) and push it towards the back.
NOTE: Accurate readings can only be obtained as shown in one of these two heat
pockets. Temperature measurements in other areas of the mouth can lead to
inaccurate readings.
ri-vital
PREDICTIVE THERMOMETER
62