Manufacturer's Data Regarding Emc - Riester ri-vital Mode D'emploi

15. Manufacturer's data regarding EMC

Electromagnetic emissions:
The device is suitable for use in the electromagnetic environment indicated below. The
user must ensure that the device is used in such an environment.
Test
HF-emission
HF-emission
harmonic
emissions
Flicker
emission
Voltage
fluctuations
Electromagnetic stability (immunity):
The device is suitable for use in the electromagnetic environment indicated below. The
user must ensure that the device is used in such an environment.
Test
Electrostatic
discharge
Voltage peaks
ri-vital
MANUFACTURER'S DATA REGARDING EMC
Result / Complied with
Group 1
Class B
yes
yes
yes
Test step Classification
+/-8 kV air +/-6 +/-8 kV air +/-6
kV contact kV contact
+/-2 kV +/-2 kV
mains +/-1 mains +/-1 kV
kV input kV input
Comment
The device must radiate electromagnetic energy
in order to fulfil its function. The functioning of
surrounding devices can be affected by this.
IEC 61000-4-2
The device is suitable for use in all facilities.
IEC 61000-4-4
IEC 61000-3-2
IEC 61000-3-3
IEC 61000-3-3
Comment
The floor should be made of a non-conductive
material.
The relative humidity should be at least 30%.
IEC 61000-4-2
The mains power should correspond to the power
in a typical business environment.
81