Videotec SW164OSM Manuel D'instructions page 63

Other configuration parameters
From the main menu press
1
changes the video system (either PAL or NTSC).
2
in order to allow a better visibility of identification texts, select a solid or a
transparent background.
3
AUTOMATIC is the parameter which sets up the return to the automatic
cycle after the manual selection of an input by an operator. The possible values
are :
•
: the function is disabled and the operator has to press
DISAB.
to the automatic cycle
•
: after 1, 5 or 10 minutes from a manual selection of an input,
1, 5, 10 min.
the matrix automatically returns to the preset sequence cycle.
9
MATRIX RESET resets the basic configuration of the matrix, removing all
modifications which may have caused execution problems, without entering the
individual menus to modify the single parameters.
7
to access the OTHER PARAMETERS submenu.
M
to return
Page 26
OTHER PARAMETERS
------------------------
1. Video system:PAL
2. Text backgr.: transp.
3. Automatic : disab.
9. Reset matrix
------------------------
PROG.End
SW164OSM 9901
7.