Videotec SW164OSM Manuel D'instructions page 41

1.6 Safety rules
The SW164OSM video switcher complies with the rules at the time of publication of the current
manual as regards electric safety, electromagnetic compatibility and the other general requirements.
The following steps should be taken to ensure maximum safety.
• Connect the unit to a power supply corresponding to the one indicated on the rating plate (see next
Chap.1.7 Operating data labels.
• The installation of the unit (and of the whole system of which this unit is part) must be carried out by
adequately skilled technical personnel
• For after-sales service, please contact only authorised technical personnel
• Never open the unit, unless following the procedures described in this manual
• The devices must be adequately grounded
• Do not pull the plug by tugging the power cable
• Before moving or carrying out technical operations on the unit, disconnect it from power supply: the unit
is considered off-line only when the power supply is disconnected and the cables used to connect the
unit to other devices have been removed
• Do not use worn or damaged extension cables, since they represent a serious risk for the user's safety
• Do not wet the unit and do not touch it with wet hands while it is operating.
• Do not expose the unit to atmospheric agents
• Do not use the device in areas containing inflammable substances
• Do not allow children or unskilled persons to use the unit
• Make sure that the unit is mounted on a sufficiently strong and solid support.
• The warranty does not cover damage resulting from an improper use of the unit.
Keep the current manual for future reference.
1.7 Operating data labels
Two labels on the back of the SW164OSM video matrix show the operating data of the device.
The first one contains:
• Identification code of the model (bar-code EXT3/9 )
• Voltage (Volt)
• Frequency (Hertz)
• Power consumption (Watt)
The second label contains the product serial number (bar-code EXT3/9)
Caution! Before installing the unit, please check if power supply satisfies matrix requirements.
The use of incorrect power supplies can be dangerous both for personnel and the equipment.
Page 4 SW164OSM 9901