Louisiana Grills LG800ELITE Instructions Et Utilisation page 10

ASSEMBLING THE CART KIT AND COOKING CABINET
Step 2 Attach lifting handles
To aid in the installation process, the LG Elite 800 does come
complete with two (2) Upper Cabinet Lifting Handles, part #27.

Following the diagram, insert each of the handles into the
rear of the upper cabinet. Gentle lift on the handle to
secure in place.
NOTE: Before fully lifting, confirm stability and
strength of the handle installation.
WARNING!
NOTE:
Damaged caused due to
Step 3 Attach the cabinets
To aid in the installation process, use the two (2) Upper Cabinet
Lifting Handles, part #27. and the grease tray access hole.
It is recommended to wear gloves

Following the diagram, lift the upper cooking cabinet up
and directly over the four (4) legs.

Slowly begin to lower the cabinet onto the legs. The legs
are designed to fit inside of the upper cabinet.

When fitted properly the upper cabinet should be sitting
flush on the to the lower cabinet panels.
Step 4 Secure the cabinets
You will require sixteen (16) screws (AA) and a Phillips screw driver.

Starting on one corner, line up the face panel of the upper cooking
cabinet with the four (4) holes in each leg.

Hand start each of the four (4) screws (BB) through the panel and
into each leg.

Using a Phillips head driver, firmly secure each screw.

Repeat procedure for the remaining three (3) sides.
10
Assembly Instruction
Due to the size and weight
of the upper cooking
cabinet, the following
installation step is a two (2)
person job.
ignoring warning or
improper installation is
NOT a warranty issue.
C
c
10