As3X Control Direction Test; Flying Tips And Repairs - Horizon Hobby E-Flite Pulse 15e Manuel D'utilisation

AS3X Control Direction Test

®
This test ensures that the AS3X control system is functioning properly.
Assemble the aircraft and bind your transmitter to the receiver before
performing this test.
1. Raise the throttle just above 25% and then lower the throttle to activate
AS3X.
CAUTION: Keep all body parts, hair and loose clothing away from a
moving propeller, as these items could become entangled.
2. Move the entire aircraft as shown and ensure the control surfaces move in
the direction indicated in the graphic. If the control surfaces do not respond
as shown, do not fl y the aircraft. Refer to the receiver manual for more
information.
Once the AS3X system is active, control surfaces may move rapidly. This is
normal. AS3X is active until the battery is disconnected.

Flying Tips and Repairs

Consult local laws and ordinances before choosing a fl ying location.
Range Check your Radio System
Before you fl y, range check the radio system. Refer to your specifi c transmitter instruc-
tion manual for range test information.
Oscillation
Once the AS3X system is active (after advancing the throttle for the fi rst time),
you will normally see the control surfaces react to aircraft movement. In some fl ight
conditions you may see oscillation (the aircraft rocks back and forth on one axis due to
overcontrol). If oscillation occurs, refer to the Troubleshooting Guide for more informa-
tion.
Takeoff
Place the aircraft in position for takeoff (facing into the wind). Select low rates
for fi rst takeoff and gradually increase the throttle to 3/4 to full and steer with
the rudder. Pull back gently on the elevator and climb to a comfortable altitude.
Aircraft
AS3X Reaction
movement
EN
Fly in this area
Stand here
13