Notes On Rfid Cards Taught As Masters; Mennekes Charge App; Requirements; Automatic Connection Of The Charge App - Mennekes AMTRON Xtra E Mode D'emploi

4.6.4 Notes on RFID cards taught as masters

The charging station comes with two RFID cards marked as
AMTRON Master.
No charging processes can be authorised with cards
marked as masters.
The charging station requires two RFID cards taught as
masters.
If a card taught as master is deleted with the service interface
or the Charge APP, the next unknown RFID card held against
the RFID card reader will be taught as master.

4.7 MENNEKES Charge APP

4.7.1 Requirements

The following requirement must be met to connect the
Charge APP to the charging station.
 Installation of the Charge APP on a mobile device (smart
phone, tablet). The MENNEKES Charge APP is available
free of charge in Apple App Store, Google Play store and
BlackBerry World.
 Integration of the charging station in the home network
over LAN / WLAN. The customer's WLAN must be
available at the location of the charging station!
 The charging station is turned on and operational.
 The smart phone / tablet must have access to the home
network (WLAN) or to the WLAN provided by the
charging station.

4.7.2 Automatic connection of the Charge APP

Fig. 10: Start menu
1. Open Charge APP.
2. Tap on "search for Wallbox" to search for charging
stations available on your network.
3. Select the desired charging station by the serial number
(SNR, see set-up data sheet).
20