Menu "Installation Settings"
Fig. 17: Menu "Installation Settings"
The menu "Installation Settings" shows the settings
applied by the installer during the setting-up process. You
cannot make any settings here.
Value
Description
AMTRON
Maximum charging current specified
Installation
during setting-up process
Current
AMTRON
No SMA SUNNY HOME MANAGER
Home
available
Manager
SMA SUNNY HOME MANAGER
Installed
available
See Chapter 4.4.1 on page 17
AMTRON
>No external tariff-switching signal
External
available
Tariff Switch
External tariff-switching signal
Installed
available
25
Menu "Customer Settings"
®
®
Fig. 18: Menu "Customer Settings"
The menu "Customer Settings" can be used to make
customer specific settings. Changes take effect by clicking on
the button "Submit".
Value
AMTRON
Customer
Current
Limitation
AMTRON
Wallbox
Name
Enable RFID
Authorisation
Description
Setting the limit of the maximum
available charging current in A.
Setting the device name. The device
name is displayed in the Charge APP and
the service interface.
Enable / disable RFID card reader.
RFID card reader enabled
RFID card reader disabled