Hartmann Vivano Tec Mode D'emploi page 13

Connecting and removing the negative pressure unit to and from
the wound dressing
Caution!
• Make sure that the tube connectors are always correctly connected
to each other in order to prevent malfunction.
• For application of the wound dressing set, follow the instructions
for use of the wound dressing set.
Connecting
Attach the connectors (tube ends) of the exudate canister to the
connectors of the wound dressing set
Removing
Press the unlocking device at the side of the connector and keep
it pressed .
2
Pull the two ends apart
Disposal
Before disposal, break off the stopper from the connector and plug
it onto the exudate lumen
This ensures that no exudate can escape from the canister.
Ensure correct disposal of the exudate canister, observing the locally
applicable regulations.
_IFU_VivanoTec_Exudate_Canister_260718.indd 13
.
1
.
3
.
4
13
EN
1
2
3
4
26.07.18 15:22