General Notes - Scheppach DP16SL Traduction Des Instructions D'origine

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We wish you a pleasant and successful working ex-
perience with your new machine.
Note
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled work-
ers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-
compliance with the electrical specifications and
the VDE 0100, DIN 57113 / VDE 0113 regulations
Warning
To avoid electrical hazards, fire hazards, or damage
to the tool, use proper circuit protection. Your drill
press is wired at the factory for 230 V operation. Con-
nect to a 230 V, 15 amp branch circuit and use a 15
amp time delay fuse or circuit breaker. To avoid shock
or fire, replace power cord immediately if it is worn,
cut or damaged in any way.
Recommendations:
Read the entire text of the operating instructions
prior to the assembly and operation of the device.
These operating instructions are intended to make
it easier for you to get familiar with your device and
utilize its intended possibilities of use. The operating
instructions contain important notes on how to work
safely, properly and economically with your machine
and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working
life of the machine. In addition to the safety regula-
tions contained herein, you must in any case comply
with the applicable regulations of your country with
respect to the operation of the machine. Put the op-
erating instructions in a clear plastic folder to protect
them from dirt and humidity, and store them near the
machine. The instructions must be read and carefully
observed by each operator prior to starting the work.
Only persons who have been trained in the use of the
machine and have been informed on the related dan-
gers and risks are allowed to use the machine. The
required minimum age must be met.
20 GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
In addition to the safety notes contained in the present
operating instructions and the special regulations of
your country, the generally recognized technical rules
for the operation of machines must be observed.

General Notes

• When you unpack the device, check all parts for
possible transport damages. In case of complaints
the supplier is to be informed immediately.
• Complaints received at a later date will not be
acknow ledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself
familiar with the device prior to using it.
• Only use original parts for accessories as well as
for wear and spare parts. Spare parts are available
from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
Technical Data
length x width x height mm
tablesize mm
tilting range table °
rotation range table °
distance chuck to table mm
distance chuck to base
plate mm
ø spindle mm
drilling chuck seat
drilling chuck
clamping range mm
drilling depth max. mm
speeds 1/min 510 - 800 - 1300 - 1800 - 2430
motor
motor power W
operating
cable length mm
weight kg
Subject to technical modifications!
Noise parameters
Noise parameters acc. to EN 3746
The rates indicated are emission values; they are not
necessarily safe working values. Although there is a
correlation between emission and immission level, it
cannot reliably be derived whether additional precau-
tions are required or not. The immission level prevail-
ing at the working place can be influenced by the fol-
lowing conditions: Duration of noise, characteristic of
the work room, other noise sources like the number
of machines, and neighbouring procedures. The reli-
able work place rates can differ from one country to
the other.
235 x 482 x 732
194 x 165
- 45 / 0 / 45
360
305
405
48
B16
3 - 16
50
230V / 50Hz
550
S2 10min
1830
23