Line Sense Up; Increase Of Light Sensitivity - Monacor TVCCD-700COL Mode D'emploi

To enter a title, set the mode with the selected
menu item TITLE to "ON>" with the key
go to the TITLE submenu with the middle key :
** TITLE **
EDIT
POSITION
RETURN
To enter the title with the selected submenu item
"EDIT", go to the title input with the key :
** TITLE **
BS
_ 0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
+ – * / • ! " # $ % & ' <
> = ? @ ; : , . [ ]
* * * * * * * * * * * * * * * * * * *
By means of the menu keys
or and
a character or a function. The selected item is indi-
cated by flashing. Press the key
character into the lowest line at the position to which
the arrow is pointing. This way, a title of maximum 20
characters can be entered. With the function "BS" the
character last entered can be deleted, with the func-
SET>
tions " " and " " the cursor (the position of the next
SET>
character to be entered) can be moved. Press the
key
ing the title, exit the submenu by selecting the func-
tion "END" and subsequently pressing the key .
With the key
and confirm with the key . With the keys
and
confirm with the key .
END
To return to the main menu, select the function
"RETURN" with the key
8.3 Line SENSE UP – increase of light sensitivity
In case of a very poor illumination, the sensitivity of
the camera can be increased. With the selected
menu item "SENSE UP", use the keys
select the desired value "OFF" (no increase of the
sensitivity), "x2", "x4", "x6", "x8", "x12", "x16", "x32",
or "x64". The shutter time is increased so that the ex-
posure time spans several pictures (frame integra-
to carry out a selected function. After complet-
select the function "POSITION>"
select the corner for the OSD insertion and
and confirm with the key .
, , and select
to enter a selected
, ,
and to
GB
27