Field Of Application - WAGNER PAINT CREW Mode D'emploi

Komponenten und Montage
GB
Usabel materials
Only for water based materials.
•
Internal emulsions
•
Paints
•
Acrylic paints
•
Glazes
•
Wood preservatives
•
Mordants
•
Primers
•
Wash primer
•
Plant protective agents
•
Under sealants
•
Hollow-space sealants
•
Disinfection agents
•
Oils
Unsuitable materials
•
Solvent based paints and lacuers
•
Paints and lacquers containing heavily abrasive
components like outdoor emulsion / dispersion wall
paints
•
Silicate paints
•
Flammable materials

Field of application

Coating of interior walls as well as small and medium-
sized objects outdoors (e.g. garden fences, garage doors,
etc.).
Industrial use is excluded.
Technical data
Voltage
Power consumption
Protection class
Maximum pressure
Flow rate at 140 bar (0 bar)
Maximum temperature of coating
material
Sound pressure level*
Uncertainty
Sound pressure output*
Uncertainty
Oscillation level**
Uncertainty
Maximum ambient temperature
Pump system
volume upper container, max.
Turning nozzle, with fast cleaning
ability
Weight, ready to spray
* Measured in accordance with EN 50144-2-7:2000
** Measured in accordance with EN 60745-1
22
230V-240V, 50 Hz
625 W
I
19.3 MPa (193 bar)
0.9 l/min (1,6 l/min)
43°C
81 dBA
K= 4 db
94 dBA
K= 4 db
< 2.5 m/s
K = 1.5 m/s
40°C
piston pump
7.5 l
XS + M
10.5 kg
Information about the oscillation level
The specified oscillation level has been measured according
to a standard test procedure and can be used to compare
against electric tools.
The oscillation level is also for determining an initial
assessment of the vibrational strain.
Attention! The vibration emission value can differ from
the specified value when the electric tool is actually in
use, depending on how the electric tool is being used. It is
necessary to specify safety measures to protect the operating
personnel. These measures are based on an estimated
shutdown during the actual conditions of use (all parts of
the operating cycle are taken into consideration here, for
example periods when the electric tool is switched off, and,
when it is switched on but running without any load).
Paint Crew