Adjusting The Active Movement - SQlab 611 ERGOWAVE Manuel De L'utilisateur

Adjusting the active movement

In order to achieve an even more effective and comfortable tilting of the saddle, the firmness of the active element in the active models
can be adjusted by replacing the elastomer.
Elastomer configuration SQlab ERGOWAVE ® active
Figure 2: SQlab ERGOWAVE ® active
with inserted elastomer
The firmness of the tilting movement can be adjusted with the SQlab ERGOWAVE ® active saddles by replacing the elastomer. The saddle
comes with 3 differently coloured elastomers that vary in firmness and are selected according to the weight of the rider.
The elastomers are not bolted or glued, but only clamped and can be pulled out towards the rear by hand.
To facilitate the change of elastomers, they can be moistened.
Figure 3: SQlab ERGOWAVE ® active
with removed elastomer