Adjusting The Active Movement - SQlab 600 active Mode D'emploi

Adjusting the active movement

In order to achieve an even more effective, comfortable tilting of the saddle, the hardness of the Active Element can be adjusted on the
SQlab 600 active. This is done with removable sticks, which are included in the Active Elements of the saddles..
Adaptation of the Active movement on the SQlab 600 active saddle
With the model SQlab 600 active up to four sticks can be removed from the damper to adjust the active movement.
Figure 2: Pressing out the sticks on the SQlab 600 active
The configuration of the sticks should always be symmetrical, i.e. always the same on the left and right. Without sticks the Damper gets
softer - especially the rotational movement around the longitudinal axis becomes stronger. Whether you ride with or without sticks
depends on your personal feeling, your sitting position and your body weight..