Intended Use - SQlab 600 active Mode D'emploi

Intended use

The SQlab 600 active should only be used after a detailed consultation with a doctor. For the most common complaints in the perineal
area, a 100 % relief of the perineum is rarely necessary.
Model name Maximum system weight
SQlab 600 active 120 kg
Category 1 according to ASTM F2043-13
This is a set of conditions for the operation of a bicycle/component on a regular paved surface where the tires are
intended to maintain ground contact.
On our website www.sq-lab.com in the service area under downloads, you will find a list of all types of use accor-
ding to ASTM F2043.
Warning
Each component has its load limit, which can be exceeded in case of overload or
during special driving manoeuvres. Please note the following:
• Never exceed the permitted system and rider weight.
• Use your saddle only in the intended use category, or a lower one (according to ASTM
F 2043-13).
• After situations in which especial or unexpected force has been exerted, such as
after a crash, a cycling mistake or an accident, carry out an extraordinary inspection.
• If in doubt, the potentially damaged component should be replaced prophylactical-
ly.In such case, play it safe and ask your SQlab dealer for advice.
• For the protection of third parties, a component which is not immediately and obvi-
ously recognisable as being defective should be clearly marked as unusable.
DEPLOYMENT CATEGORY ACCORDING TO
ASTM F2043-13
Category 1
eBike Ready Label
No