Intended Use - SQlab M-D Serie Mode D'emploi

Intended use

The different models of the SQlab M-D Line are designed for the different fields of application such as travel, commuting as well as City
and Trekking bikes, They have been developed and tested in numerous tests. Overload and damage to the saddle is determined by the
nature of the surface being ridden on, riding ability, riding style, rider weight or the total system weight and other special events such as
riding errors, falls and accidents. In the description of the intended use we follow the international categorization ASTM F2043-13, that
defines the different fields of application as precisely as possible.
Model name Maximum rider weight
SQlab 621 M-D active 150 kg
SQlab 602 M-D active 150 kg
Category 1 according to ASTM F2043-13
Bicycles/add-on components in this category must circulate only on tarred or paved roads and paths in which the
wheels have permanent ground contact.
On our website www.sq-lab.com in the service area under downloads, you will find a list of all types of
use according to ASTM F2043.
Warning
Each component has its load limit, which can be exceeded in case of overload or
during special driving manoeuvres. Please note the following:
• Never exceed the permitted system and rider weight.
• Use your saddle only in the intended use category, or a lower one (according to
ASTM F 2043-13).
• After situations in which especial or unexpected force has been exerted, such as
after a crash, a cycling mistake or an accident, carry out an extraordinary inspecti-
on.
• If in doubt, the potentially damaged component should be replaced prophylactical-
ly. In such case, play it safe and ask your SQlab dealer for advice.
• For the protection of third parties, a component which is not immediately and
obviously recognisable as being defective should be clearly marked as unusable.
Deployment category according to
ASTM F2043-13
Category 1
Category 1
eBike Ready Label
Yes
Yes